The 6 Best Metal Fabrication Services in Calgary

Best Metal Fabrication Services in Calgary

By Claire Lee

A successful building project starts with a strong foundation made not only from high-quality materials but by excellent steelworks. Your metal fabrication project will need a handyman who not only knows how to get the job done but is also someone who understands how to operate heavy equipment and machinery.

If your goal is to find people highly skilled for the job, you are on the right page because this list contains the best metal fabrication services in Calgary!

How Much Do Metal Fabrication Services Cost in Calgary?

High-quality metal fabrication is a cost-effective process that ensures the efficiency and durability of your machinery or construction project. That is why on average, it comes at a pretty high cost.

Keep in mind, though, that this is just general information so the actual amount you need to spend for your metal fabrication needs will be given to you when you request a quote from one of these firms on our list!

ServiceAverage Cost
Primer Coat Fabrication$1,200 – $1,500 per ton
Sheet Metal Fabrication$1,000 to $4,000 per ton
Welding Services$65 – $125 per hour + minimum service fee

The Best Metal Fabrication Services in Calgary

Now that you know the average cost of metal fabrication services in Calgary, you’re probably beginning to picture the end result of your project. To make that happen, let’s see which of these metal fabrication services suits your project requirements!

1.   The Welding Shop

The Welding Shop's Homepage
SERVICESArchitectural & ornamental work, Plasma & oxy-acetylene Cutting, Structural steel fabrication & erection, General welding, Construction and heavy equipment repairs
WEBSITEhttps://theweldingshopcalgary.com/
ADDRESS5110 – 76 Ave SE, Calgary AB, T2C 2X2
CONTACT DETAILSPhone: 403-273-7717
Email: [email protected]
OPERATING HOURSMon-Fri 8:00 am – 4:30 pm

The Welding Shop has been running for over 45 years and has since served hundreds of customers to their satisfaction with all of their services.

They offer both in-shop and mobile services so no matter what your requirement is in terms of location, they can provide it with no worries.

These services include welding, modifying, building, repairing, design & drafting to fabrication and finishing, as well as complete custom metal fabrication. Their main focus is their custom fabrication.

With this, they specialize in steel, stainless steel, aluminum, and cast iron materials. All of their services are the most affordable possible.

A few examples of what they can work on are custom fabrication and modifications of truck decks and trailers, rack fabrication, aluminum fabrication, and any size of miscellaneous manufacturing projects.

To get a free quote on your project, just contact them through the number on the table above.

This company is a CWB to CSA Standard 47.1 certified company so you can be sure that they only offer the highest craftsmanship and quality of materials used.

Pros

  • Offers a wide range of services
  • Offers free quotes on projects
  • Offer in-shop and mobile services
  • CWB to CSA Standard 47.1 certified

Cons

  • No mention of rates
  • Does not cater to large-scale projects such as construction and engineering ones

Customer Reviews

Let’s take a look at these reviews left by their clients:

“Great service, great prices, friendly staff. I had a great experience with these guys. Came up with a creative solution to a big problem I had. Highly recommend”  -Chris

“They have repeatedly turned my hair brained ideas that are poorly sketched into well built finished products.  Years ago I tried several other welding shops with mediocre results, but then I discovered THE Welding Shop and now it’s the only place I go.”  -Brendan

2.   Aaron Machine Shop Ltd

Aaron Machine Shop Ltd's Homepage
SERVICESOil and gas technologies, Prototyping and tool making, Hydraulic repair – test and rebuild cylinder, Welding, CNC machining, Specialized metal fabrication
WEBSITEhttps://www.aaronmachineshop.com/
ADDRESSBay C, 7008 5 ST, (11,075.03 km), T2H 2G3 Calgary, AB, Canada
CONTACT DETAILSMain: 403-255-2425
Fax: 40-255-2486
Email: [email protected]
OPERATING HOURSMon-Fri 8:00 am – 4:30 pm
Sat 8:00 am – 12:00 nn

Since it was established in 1996, Aaron Machine Shop has made its customers satisfied with their ideal workmanship and fast delivery of projects. This is both with welding and custom metal fabrication.

They can fabricate anything you need them to but they specialize in the fabrication of metal for cabinets, custom-built machines, display cases, fire pits, housing, furniture, racks, trophies, and so much more. One thing they keep on reiterating is that their company is flexible, meticulous, and efficient so you know they won’t compromise in terms of quality.

If you’re looking at them to make you a project that requires more than one quantity of a product, they’ll begin by making a prototype to ensure you’re on the same page. Once they receive the go-signal from you, the process begins.

This is regardless of what industry you’re in because they seem to really be able to work with all. Whether you’re in the commercial, industrial, or residential sector, they know how to get your project done right.

We also like how they keep most of their materials in stock because this ensures quick turnaround times for projects. They also make sure they use the metals of the highest quality but still somehow managing to remain affordable and budget-friendly with their rates.

Pros

  • Budget-friendly
  • Wide range of services
  • Quick turnaround times
  • Works with a variety of industries

Cons

  • Does not offer free quote
  • Does not offer mobile services
  • By appointment only

Customer Reviews

Here are some feedbacks from happy customers:

“As a mechanics teacher, anytime I need a machine shop. This is my go to place! Needed brake caliber mounts water jet cut and tapped. Aaron machine shop gave me perfect parts. Also required a power steering pump inlet drilled and tapped for -10an fitting. Absolutely perfect.”  -Iain

“I had Damien from Aaron Machine Shop work on my bar stools.  He did a fantastic job reducing the height of the stools.  No obvious visible welding marks, very clean work.  Looks like it just came out of the factory.”  -Clint

3.   CSM Steel Fab & Repair

CSM Steel Fab & Repair's Homepage
SERVICESCustom metal fabrication, general welding, Equipment maintenance & repair, On-site new building construction or repair, Design/problem solutions, Furniture
WEBSITEhttps://www.csmsteelfab.com/
ADDRESS4905 30 St SE #3109, Calgary AB, T2B 0P1, Canada
CONTACT DETAILSPhone: +1 403-660-5375
OPERATING HOURSMon-Fri 8:00 am – 5:00 am

Whether you’re looking to build complex oilfield equipment or simple decor for your home’s bathroom, you can take a look at CSM Steel Fab & Repair.

They specialize in custom metal fabrication for residential, industrial, and even commercial applications. You might have heard of them because they’re well-known around Calgary for their quality metalwork.

Building and repairing anything are their services and they always say that no job is too big or small. No matter what you want them to create for you, all you have to do is let them know what you want and they’ll make it for you within your desired timeframe.

They offer a full range of welding needs whether it’s for carbon steel, stainless steel, or aluminum. They also offer mobile services around Alberta so if you have any relatives outside of Calgary looking for a metal fabrication service, remember to suggest CSM.

Note that they’re also CWB certified.

Pros

  • Offers mobile services
  • CWB certified
  • Offers wide range of services
  • Works on small and large projects

Cons

  • No mention of rates
  • No free quote

Customer Reviews

Read on to find out Josh and Tobyn’s experience with this shop:

“To say Cam exceeded my expectations would be an understatement. He just finished building and installing a spiral staircase for my new home, and I’m blown away. The detail and craftsmanship that went in to it shows. It was a bit of a delay. Due to our lousy weather this summer, set him back a bit. However it was absolutely worth the wait and I couldn’t be happier. It’s already become the topic of discussion with my neighbors. I highly recommend Cam and his welding shop”  -Josh

“Cameron helped me with some metal work. He was extremely polite and friendly, and he did the job perfectly. Thank you so much!”  -Tobyn

4.   Bow Ridge Steel Fabrication

Bow Ridge Steel Fabrication's Homepage
SERVICESCustom & general welding, Fabrication of trailers, OilField skids & related oil field equipment/ packages, Electrical substation support structures; Portable welding, Manufacturer of substation control & oil field structures/buildings, Fabrication of miscellaneous steel, and Design services
WEBSITEhttp://www.bowridgefab.ca/
ADDRESS342 – 36 Avenue NE, Calgary AB, T2E 2L5
CONTACT DETAILSPhone: (403) 230 – 3705
Email: [email protected]
OPERATING HOURSMon-Fri 7:00 am – 3:30 pm

Now, this one here is more of a specialized type of fabrication service. Bow Ridge focuses on steel, which isn’t really a metal but is a variation of metal and alloy.

They’ve been supplying steel fabrication solutions to their clients since 1976 and have garnered solid business relationships with most of them. Since they’re affiliated with BRT Consulting Ltd., they supply civil and structural engineering services to their clients.

Their custom and general welding service include specialty fabrication as well as portable welding options. Their world-class steel fabrication services include design services, engineering, as well as construction.

They also provide manufacturing services to clients who build equipment. These custom fabrication and turnkey projects are vital in the eyes of Bow Ridge which is why they never compromise.

When they take on a project, they pair the project with the perfect professionals whose skill sets match the requirements of the job to ensure that the job is done perfectly and with no hitches.

Pros

  • Focuses on providing design, engineering, and construction solutions
  • Portable welding solutions
  • Specializes in steel fabrication

Cons

  • Does not take on small-scale projects
  • Does not offer free quote

Customer Reviews

Check out this review left by a past client of Bow Ridge:

“Great work, even better people.” -Haddow

5.   Sureway Metal Systems

Sureway Metal Systems' Homepage
SERVICESLaser cutting, Plasma cutting, Plate shearing, Brake forming, Flame cutting, Automatic saw cutting, Drill and tap, Beam splitting, Plate rolling, Ironworker, Stud welding
WEBSITEhttps://www.surewaymetal.com/
ADDRESS2825120 Duff Drive SE, Calgary SB, T1X 0K1
CONTACT DETAILSPhone: 403-287-2742
Fax: 403-243-6457
OPERATING HOURSMon-Fri, 7:30 am – 3:30 pm

The Sureway Group of Companies is a fully integrated metal manufacturing and steel service center that’s been in operation since 1970.

With three divisions (Processing, Warehouse, and Welding & Fabrication) and over 120 employees, they are a one-stop metal fabrication facility. They also make use of the latest technology and production equipment in all their projects which makes them versatile, fast-paced, and competent.

They offer metal fabrication services for stainless steel, steel, and aluminum with the use of equipment like saws, punch presses, plasma, and CNC brakes. Their use of these paired with their partnerships with steel mills in North America makes sure that their projects are done quickly and remain affordable.

Some of the industries they supply products for include construction, oil and gas, power, transmission, oils sands, mining, and drilling industries.

They also offer all sorts of steel products that you can purchase directly from major mills in North America. If you need help with this, you can always ask for help from their staff.

Their business is CWB validated with W47.1, W59, and W186 certifications.

Pros

  • Works directly with steel mills
  • Quick turnarounds times
  • Affordable services
  • Works mainly on large projects

Cons

  • Does not cater to small-scale projects
  • No free quote

Customer Reviews

Below are some reviews from recent clients:

“I did a very large steel processing project with Sureway Metal last month and they were fantastic.  On time, under budget and great quality.  Their shops are very impressive and the staff were very professional. I would recommend Sureway to anyone wanting processing, fabrication and steel supply.  They are very unique in the way they can buy all steel directly from the steel mills.”  -Steve

“I needed a few rush fabricated items for a project in northern AB. Sureway came through quickly and the product was excellent. It saved our site a lot of stress and money. Would work with them again.”  -Jocelyn

6.   Exx-Ell Industries Inc

SERVICESMetal fabrication and Welding Calgary Services
Shearing & Forming
Coating Services
Welding Calgary
Punch Press
Rolling
Laser Cutting
Plasma Cutting
Machining
Cutting & Sawing
Notching
Sandblasting
Production Runs
Drafting Services
WEBSITEhttps://exx-ell.com/
ADDRESS34, 1511 Highfield Cres. SE
Calgary, Alberta, T2G 5M4
CONTACT DETAILSPhone: 403-243-7772
Toll Free: 1-877-388-7772
OPERATING HOURSMonday  – Thursday: 5:30 am – 4:00 pm
Fridays: Closed

Exx-Ell Industries Inc has been serving Calgarians since the year 1989. Consider them now as your one-stop-shop for services related to metal manufacturing.

What’s great about them is that they offer CNC machinery, full welding facilities, and proficiency in aluminum, steel, and stainless steel, either in sheet metal or structural form. No matter how big or small the project is, either from prototyping to large production runs, they can turn your dream into reality.

In comparison to other companies, they only utilize the latest CNC machinery which allows them to process a vast range of materials and finishes. Their CNC machinery includes laser cutters, bending machines, and much more to make sure you get exactly what you want from your service.

Another reason why we can recommend them is that their metal fabrication services can cater to medium batch runs or high-volume batch runs. Plus, can provide a complete metal fabrication service by making your designs turn into a final and finished quality product.

Pros

  • Over 20 years of experience
  • Wide range of services
  • Competitive pricing
  • Details of their services can be read on their page

Cons

  • Closed on Fridays and weekends

FAQs about Metal Fabrication Services in Calgary


In any project that includes machinery and other heavy raw materials, quality and safety are the top priority. Their expertise and dedication to what they do will contribute to the success of whatever you’re trying to build—may it be machines for your business, home, or hobbies.

What are your thoughts about these firms for metal fabrication services in Calgary? Send us a message and we will get back to you a bit.

By the way, check out our article on the list of the top firms for the best steel fabrication in Calgary!

Leave a Comment